Freitag, 1. September 2017

Wave run SB4


Test SB4 1 to 11 is now complete, and it shows some interesting results; the beach face is eroding, apart from the final 3 hour run where SB4-11 shows accretion (fig.1). However, as expected the sand bar is slowly migrating landwards, with a significant difference again in SB4-11 (purple). On the whole though the bar doesn't seem to be moving much! 
Apart from this all the instruments are running smoothly, we're having slight issues with the vectrinos being buried in the sediment, so every now and again one of us jumps into the murky waters in the flume and adjusts the rigs. 
There's also been some casualties, myself and Emily managed to both break our glasses! Luckily mine were fixable, however Emily's were not... May they rest in peace. 
Figure 1 - Run SB4 1 to 11, a zoomed figure of the beach face.

Figure 2 -  Run SB4 1 to 11, a zoomed figure of the sand bar.
Figure 3 -  Run SB4 1 to 11, a full profile.


Mittwoch, 30. August 2017

It's time to jump in the flume!

It was a scorching 35 degrees in the flume today, and so I couldn't resist but to go for a swim... It was quite refreshing despite the look on my face, although I did have to do some maintenance on rig 1. We raised the rig up 8 cm on the leg as the vectrino and EMCM was buried in the sediment. This is due to the foot of the leg creating a huge scour hole, resulting in the whole rig to drop. We are trying to think of a more effective solution, however until then we will just have to go swimming and adjust the height. 


Today's activities included raising the sea level once more another 10 cm, making the sea level 4.9 m. The profiles have shown a significant difference between the first run (SB4_1) and the last run (SB4_4), with the bar edging landwards by ~90 cm. As well as this figure 1 appears to be indicating that the mega ripples are migrating back, seawards.
Again the beach face continues to erode (fig.2), more so after SB4_2 (40 mins), and the berm is gradually being built up. 

Sea level = 4.9 m
Wave height = 0.8 m
Wave period = 6.0 s
Figure 1 - Cross-shore profile of test SB4_1 to 4 (4 hours), showing the elevation of the outer sand bar and mega ripples.

Figure 2 - Cross-shore profile of test SB4_1 to 4, showing the elevation of the beach face and berm.

Figure 3 - Cross-shore profile of test SB4_1 to 4 of the elevation of sediment across the whole beach.

Dienstag, 29. August 2017

Sea level is rising

Flume re-filled, this time with an increase of 0.1 m, making the sea level now 4.8 m. The sand bar carries on migrating seawards, until the last run (SB3_6, in green), the bar starts to migrate landwards. Erosion occurring on the beach face is larger between the first 3 runs, but this decreases once the 60 minute wave sets run and the beach becomes stable.

Sea level = 4.8 m
Wave height = 0.8 m
Wave period = 6.0 s
Beach profile showing the elevation of sediment of test SB3 (sandy beach 3).


A zoomed in version of the sand bar and mega ripples (SB3).



A zoomed in version of the beachface and berm (SB3).



Montag, 28. August 2017

Megaripples revealed

And we're back in the flume again! We had a day off on Monday as it was maintenance day for the wave paddle, but we still came in to adjust the rigs. However this meant the flume was drained and we could see the beach profile, with some interesting finds...!

Birds eye shot of rig 1 and 2, looking at the megaripples and sand bar.

Emily holding a 1 m long tape measure, to get an idea of the scale of the megaripples, pretty big!  


Rig 2 (shorewards), stuck among the megaripples. 

Rig 1 (seawards), located on the beginning of the sand bar.


Facing seawards with a view of the sand bar.

The back of the sand bar looking out seawards, showing some erosion as the water was drained.

Both rigs were raised, and the legs were moved backwards so they were in-line with the instruments. Hopefully this will help prevent the sensors from getting buried. Job done, nice short day! 

Freitag, 25. August 2017

The A team

Day 10 in the flume and another week down! The sea level has now risen an extra 0.2 m in total (SB2), meaning we had to make a shelter for us and our laptops! We're really starting to make ourselves as home here, thank you hydralab!

Sea level = 4.6 m
Wave height = 0.8 m
Wave period = 6.0 s
Our new office with protection! 
It's also getting extremely hot in here, the mucky flume is looking more and more inviting to jump in... Anyway, the profile is becoming more stable, the sand bar has stopped moving seaward and hopefully on Tuesday with another sea level rise we will see the bar migrate landwards. We are also still seeing beach face erosion and berm growth, as well as lots of mega ripples in the surf-zone, which can also be seen on the ripple profiler.

Finally, it's that dreaded time of the week where we had to say goodbye to two more of our team members, Daniel and Ozzy. We started this experiment with 11 people and we've now dwindled down to just 3, it's okay though we're an efficient team #ateam. So efficient we managed to finish a day ahead of schedule, meaning we can raise the sea level up another 10 cm on Tuesday. But until then we're going to take a little trip to Berlin and relax!

Mittwoch, 23. August 2017

Climate change is upon us

Guten morgen! It's day 8 in the flume, and we're running 3 hour wave runs (SB0). That's quite a long time in between runs but we're finding ways of occupying ourselves, like reading papers, processing data on matlab, or making yourself look like a pig with a coffee mug... times are hard!


The beach appears to be stabilizing, so today's the day! The sun is shining, the tank is clean (well maybe not clean, but it's definitely hot here) and climate change is upon us... yes that's right the sea level has risen by 10 cm and we are now on SB1! Look at them waves crash. The 'sea spray' is splashing onto our laptops now, so we need to take cover! Hopefully tomorrow we'll see a change in the sand bar migration, or maybe we won't and it'll just flatten out and re-form further up the beach? You'll find out tomorrow!
Once again we say goodbye to two of our team, Chris and Tom. Thank you so much for you help and fingers crossed everything will go to schedule... Otherwise you maybe hearing from us Chris!
Final update - the vectrinos still don't work (just incase any of you were concerned). Thank you Peter for trying to sort it from all the way back in England, much appreciated!

Sea level = 4.6 m
Wave height = 0.8 m
Wave period = 6.0 s





Dienstag, 22. August 2017

Let the flume see the waves!

Day 7 in the Large Water Flume...
Beach drained, profile revealed, wonky rig! Not ideal... Everyone in the flume!
Unsurprisingly the rig was quite heavy, but rig 1 is now level with the horizontal bar and we're ready for waves.




Again, another successful day, apart from the vectrinos of course... same story different day, maybe they won't timeout tomorrow! The 3D scanner is showing the sand bar migrating seawards with the inner bar following behind. Completed 1x2 hour and 1x3 hour run of SB0. The instruments don't seem to be submerged in the seabed so no need to drain the flume again tonight. Everyone's happy, so all is good in the Large Water Flume!

Sea level = 4.5 m
Wave height = 0.8 m
Wave period = 6.0 s

Emily working hard in the office! Anyone need a laptop?

Ozzy, Paul and Chris making themselves look busy on the trolley!

3D Sonar Scan screenshot of the profile at 228.79 m with a 4.5 m radius. Top right image is a birds eye view of the seabed (the top being landwards, bottom being seawards). Red represents an elevation in sediment and green a decrease. Bottom left is a side on view of the cross-shore profile, you can see the crest of the bar on the left, before the shadowing of data appears and on the right the inner bar is starting to emerge. Bottom right image is the final 3D image - it has been rotated so that it is looking at the beach profile side on, with the right side being landwards and left being seawards. This angle shows a clearer view of the inner sand bar (on the right) the trough (in the middle, green) and the outer sandbar (on the left).